A numerical study integrated with RSM for hydrothermal and entropy performance of porous jet impingement

Abstract

AbstractThe thermohydraulic and thermodynamic performance of porous jet impingement under pressure drop effect has not yet been jointly published. Thus, the novelty of this work computationally along with the response surface methodology (RSM) optimization approach considers the porous jet impingement performance linked with a pressure drop simultaneously. Also, the current study used a novel multiobjective optimum design study for various design parameters, such as porosity (ε), Darcy number (Da), and pore per inch (PPI), under numerical simulation assessment of forced laminar convection of jet impingement with full and partial metal foam. The influence of various base plate thicknesses (t = 0, 1, 2, and 3 mm), various nanofluids (Al2O3, CuO, SiO2, and ZnO), and the metal foam size percentage (W/L = 0, 0.25, 0.5, 0.75, and 1) on the improvement of the thermohydraulic and thermodynamic performance is also simulated. Results indicated that utilizing pure water and a metal foam size (W/L) of 1 along with a base plate thickness of 0 mm produced the preferable thermohydraulic and thermodynamic performance. Furthermore, according to an optimization analysis, the current study's objective for the thermohydraulic and thermodynamic performance of jet impingement can be achieved using the parameters porosity ε = 0.1, Darcy number, Da = 1, and the PPI = 15. Therefore, this investigation integrating computational fluid dynamics and RSM offers considerable innovation and useful reference for the optimum design of a porous jet impingement cooling.