A numerical model for drying of spherical object in an indirect type solar dryer and estimating the drying time at different moisture level and air temperature

Abstract

ABSTRACTA numerical model for simultaneous heat and mass transfer was developed for solar drying of spherical objects and the object considered is green peas. Solar collector outlet temperature is assumed as drying chamber temperature and justified through energy balance equations. Assumptions are imposed on heat and mass transfer governing equations without losing the physics of the problem. Discretization is performed by finite difference method with implicit scheme. To generalize, the governing equation and boundary conditions are non-dimensionalized. The set of finite difference equations was solved by Tridiagonal Matrix Algorithm and a computer code in MATLAB was developed to solve them. The drying curves showed two stages of drying, initial, and secondary drying stage. At all drying temperatures and drying time, the center moisture was maximum and it was minimum at the boundary. A percentage of 85.67 surface moisture content and 25.33% center moisture was eliminated in the first 1 hr at 348 K. The product should be dried up to 7.45, 4.74, and 3.74 hr at air drying temperatures of 318, 333, and 348 K respectively, to maintain 10% of the product’s initial moisture content. The result is compared with the experimental result from literature and they are found to be in good agreement.