Abstract

Micro-nano droplet collisions are fundamental phenomena in the applications of nanocoating, nano spray, and microfluidics. Detailed investigations of the process of the droplet collisions under higher Weber are still lacking when compared with previous research studies under a low Weber number below 120. Collision dynamics of unequal-sized micro-nano droplets are simulated by a coupled level-set and volume of fluid (CLSVOF) method with adaptive mesh refinement (AMR). The effects of the size ratio (from 0.25 to 0.75) and different initial collision velocities on the head-on collision process of two unequal-sized droplets at We = 210 are studied. Complex droplets will form the filament structure and break up with satellite droplets under higher Weber. The filament structure is easier to disengage from the complex droplet as the size ratio increases. The surface energy converting from kinetic energy increases with the size ratio, which promotes a better spreading effect. When two droplets keep the constant relative velocity, the motion tendency of the droplets after the collision is mainly dominated by the large droplet. On one hand, compared with binary equal-sized droplet collisions, a hole-like structure can be observed more clearly since the initial velocity of a large droplet decreases in the deformation process of binary unequal-sized droplets. On the other hand, the rim spreads outward as the initial velocity of the larger droplet increases, which leads to its thickening.

Highlights

  • The collision dynamics of binary micro-scale liquid droplets play an important role in the development of nanocoating [1] and nano-spray technology [2,3,4]

  • This paper focuses on the application of the coupled level-set and volume of fluid (CLSVOF) methodology for the numerical investigation of the collision behavior of unequal-sized micro-nano Droplets

  • Binary unequal-sized micro-nano droplets collision has been numerically simulated by a coupled level-set and volume of fluid (CLSVOF) method with adaptive mesh refinement (AMR)

Read more

Summary

Introduction

The collision dynamics of binary micro-scale liquid droplets play an important role in the development of nanocoating [1] and nano-spray technology [2,3,4]. Kuan et al [16] developed a parallel, adaptive Eulerian-Lagrangian interface-tracking method to investigate head-on collisions of water droplets at high Weber numbers Their simulations found that the rim grew with bread-like structures, and the extent of the retraction and deformation on the rim becomes weaker as the Weber number increases. Deformation processes, the flow field, and the energy evolution of binary unequal-sized droplet collisions under a higher Weber number will be discussed in detail. This method can capture the complex evolutionary process of the interface with an accurate normal vector and good quality conservation, which has been applied successfully in the past work [18,19,20].

Mathematical Formulation
Numerical Model
Comparison with Experiments
Results and Discussion
The Effects of the Initial Velocity
Evolution of Dimensionless Energy
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call