Abstract
Friction stir welding is a relatively new solid-state welding process which has several superiorities over generic welding methods. In this study, aluminium alloys (AA5083-O and AA6061-T6) are selected to investigate effects of three welding variables namely tool rotation speed, tool traverse speed, and tool diameter on temperature distribution, weld width, weld depth, and heat affected zone width using finite element method. The Johnson-Cook plasticity model is implemented into Abaqus software to simulate the material plastic deformation occurring during welding process. The results demonstrated that increasing rotational speed and tool diameter lead in an increase in material temperature. Increasing traverse speed resulted in lower temperature distribution. Temperature distribution, as well as the size and shape of welding areas, are also different due to different mechanical and thermal properties. The wider heat affected zone predicted for the AA6061-T6 can be explained by its higher thermal conductivity and lower specific heat. [Submitted 16 October 2018; Accepted 25 May 2019]
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
