Abstract
This paper presents the novel design of a wideband circularly polarized (CP) Radio Frequency Identiflcation (RFID) reader microstrip patch antenna for worldwide Ultra High Frequency (UHF) band which covers 840{960MHz. The proposed antenna, which consists of a microstrip patch with truncated corners and a cross slot, is placed on a foam substrate (r = 1:06) above a ground plane and is fed through vias through ground plane holes that extend from the quadrature 3dB branch line hybrid coupler placed below the ground plane. This helps to separate feed network radiation, from the patch antenna and keeping the CP purity. The prototype antenna was fabricated with a total size of 225 £ 250 £ 12:8mm 3 which shows a measured impedance matching band of 840{1150MHz (31.2%) as well as measured rotating linear based circularly polarized radiation patterns. The simulated and measured 3dB Axial Ratio (AR) bandwidth is better than 23% from 840{1050MHz meeting and exceeding the target worldwide RFID UHF band.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
