A Novel Variable Reactor and Its Application to Shunt Power Quality Controller

Abstract

A novel variable reactor based on transformer is proposed in the paper. In the variable reactor, a transformer with air gap is chosen, and the primary voltage is detected and used as the reference signal. A voltage-sourced inverter is applied to track the reference signal in order to yield a controllable voltage, which is applied across the secondary winding of the transformer. When the secondary-controlled voltage and the primary voltage satisfy a proportional condition, the equivalent impedance of primary winding of the transformer will vary continuously. According to the novel variable reactor, a novel shunt power quality controller is proposed and its principle is analyzed in detail. The shunt power quality controller is characterized by parallel topology and single frequency control. The approaches of decreasing the transformer leakage inductance are addressed. The experimental results verify the validity of the shunt power quality controller.