A Novel Ultrawideband Branch Waveguide Coupler With Low Amplitude Imbalance

Abstract

In this article, we present a novel ultrawideband branch waveguide coupler (BWC) with low amplitude imbalance. This novel design is based on a new structure of branch waveguide obtained by symmetrically increasing the waveguide width. The coupling degree can be independently controlled by the height and width of the new branch waveguide, which significantly increases the design flexibility. In addition, this structure can produce a transmission zero (TZ), and a concept to improve the fractional bandwidth of the BWC with out-of-band TZ is proposed. Based on the analysis, the design guidelines for the novel BWC are provided. For a given center frequency, an n-branch novel BWC can be easily designed. Moreover, because of the larger branch waveguide height, this novel design has greatly eased the machining difficulty. Finally, to verify the design concept, a <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$W$ </tex-math></inline-formula> -band eight-branch prototype is processed and measured. In full <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$W$ </tex-math></inline-formula> -band, the amplitude imbalance is less than 0.52 dB, the phase imbalance is less than 2.5°, the return loss (RL) is greater than 21.4 dB, and the isolation is greater than 20.5 dB. The simulation and experimental results are in good agreement.