Abstract

In this article, a new topology for a grid-connected solar photovoltaic inverter for the direct connection to the medium-voltage grid is proposed. This topology employs an <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">LLC</i> resonant converter with a high-frequency (HF) isolation transformer in the dcā€“dc stage. The output of the dcā€“dc stage is a rectified sine wave voltage and current at the line frequency. An unfolder inverter interfaces between this dc stage and the grid. A combined phase-shift and frequency control method is used to control the <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">LLC</i> resonant converter. The phase-shift angle and switching frequency values of the <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">LLC</i> resonant converter are regulated to track the reference current signal for the whole operation range. The Lagrange multiplier method is applied to find the optimal trajectory to calculate the optimal phase-shift angle and switching frequency pairs for any operation condition by considering power converter and HF transformer losses to achieve the highest efficiency at a varying current. The transformer leakage and magnetization inductances are properly designed to provide a zero-voltage switching (ZVS) for a wide operation area, and additional resonant inductor requirement is removed. The <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">LLC</i> converter operates in a ZVS region except in a narrow band around the zero-current crossings of the inverter output. Using an HF transformer in the <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">LLC</i> resonant converter, a bulky line frequency transformer requirement is eliminated, and thus, a more compact and efficient design is obtained. The proposed topology is validated by the simulation and experimental results.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.