Abstract
A titrimetric method for monitoring toxicity in suspended biomass was applied in order to measure the activity of nitrifying biofilms and to determine the effect of several toxic compounds on the biofilm. Three typical tannery compounds, quebracho extract, NaCl and Cr+3 were selected to study their toxicity on the biofilms. The results obtained showed an acceptable repeatability of the method for all the toxicants tested with an average standard deviation of less than 10%. Biofilm systems showed higher resistance to the toxicants, when the results obtained using suspended nitrifying biomass, were compared with those found in the literature. The IC50 obtained with quebracho was 8.8 g/L of quebracho extract, while around 65% of maximum activity was attained with 8.7 g/L of NaCl or 120 mg/L Cr+3. The quebracho extract, NaCl and Cr+3 were 26%, 38% and 18%, respectively, less toxic in the biofilm system than for a suspended biomass culture.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
