A Novel Synchronized Multiple Output DC-DC Converter Based on Hybrid Flyback-Cuk Topologies

Abstract

This paper proposes a new hybrid flyback-Cuk (HFC) converter. The new converter consists of a single switch, a single isolated input, and dual output based on flyback and Cuk topologies. The new HFC topology is proposed to reduce switching losses and improve the duty cycle range over which voltage can be stepped down, which would ultimately lead to an increase in efficiency. For step-down capability, the traditional single topologies (flyback or Cuk) require a less than 50% duty cycle. The low duty cycle of conventional converters leads to low operational efficiency. Therefore, the developed HFC can operate at a duty cycle of up to 85% for the same capability. The analysis, derivations, design, and simulation of the proposed HFC are thoroughly discussed for two different applications at two different power levels. The simulation results are obtained using MATLAB 2020a. The developed HFC’s efficiency as a function of the duty cycle is plotted, which reaches 89%, representing a significant efficiency improvement. The proposed converter can supply and absorb power simultaneously, giving it a significant edge over other converters. It is suitable for energy conversion and storage systems, such as renewable energy systems and electric vehicles (EV). To show the effectiveness and validate the new topology proposed, an EV along with battery energy storage (BES), is applied to charge (EV) and recharge (BES) simultaneously. The simulation results of 1.5 kW of HFC-PFC over the universal voltage range show that the proposed HFC can achieve a high power factor up to 97.5% at 260 Vrms. Moreover, the total harmonics distortion is measured between 36.25 and 27.69%. Thus, the results can achieve all required functions efficiently with minimum losses at a high range of duty cycles.