A novel strategy for arsenic removal from acid wastewater via strong reduction processing.

Abstract

Due to the high-acidic arsenic-containing wastewater pollution greatly threatening human health and ecological safety, a simple and efficient method for reducing arsenic was proposed in this paper to solve this problem. By using potassium borohydride (KBH4) as a reducing agent, the soluble arsenic was converted into the gaseous arsine (AsH3) or solid arsenic (As0) to achieve the purpose of removing arsenic in wastewater. By exploring the reaction kinetics of the arsenic removal process, it was found that the fast reaction stage (0-2min) conformed to pseudo-first-order kinetics. The removal rate of arsenic increased to over 73% in 0.5min, and reaction equilibrium was reached after 30min. Various influence factors including arsenic valence, aeration, addition method, concentrations of reducing agent, and hydrogen ion (H+) were investigated. The results showed that As(III) was easier to be removed by reduction than As(V), while adding KBH4 in multiples and aeration were both favorable to the removal of arsenic. Increased concentration of KBH4 also enhanced the removal of arsenic. Appropriate H+ concentration contributed to the arsenic removal, but excessive H+ concentration conversely has an inhibitory effect. The maximum removal rate of arsenic was 95.87%, with the maximum removal capacity of 45.50mg/g. Based on the XRD and SEM-EDS analysis of residue, amorphous arsenic (As0) with a mass ratio of more than 94.52% was generated after the reduction of soluble arsenic. Our study demonstrated that the reaction mechanism of reductive degradation is soluble arsenic with hydrogen radicals (H•) to form arsenic (As0) and arsine (AsH3) (in the molar ratio of 6:1). Although the generated solid arsenic (As0) is convenient for the soluble arsenic removal from wastewater, attention must be paid to the formation of AsH3, and strategies for AsH3 treatment should be considered.