A Novel State-of-Charge-Based Droop Control for Battery Energy Storage Systems to Support Coordinated Operation of DC Microgrids

Abstract

A modern dc microgrid often comprises renewable energy sources (RESs), such as photovoltaic (PV) generation units, battery energy storage systems (BESSs), and local load, and it is also connected to the utility grid through a point of common coupling (PCC). While most existing approaches have to rely on communication links to achieve the desired control performance, this article proposes a novel control strategy without resorting to the communication links. This is achieved by assigning BESSs as master units and regulating the dc bus voltage with a novel state-of-charge (SoC)-based droop control, where the BESSs coordinate the slave units (e.g., RES and utility grid) with the aid of the dc bus signaling (DBS) technique to avoid overcharging and overdischarging of these BESSs. In the proposed droop control, the reference voltage for these BESSs is designed for coordinated operation between BESSs and utility grid, and it is maintained constant in the normal SoC range, which can reduce dc voltage variation. Droop coefficients designed for SoC balance of BESSs are dynamically adjusted based on their own SoC values. Furthermore, the preset maximum deviation between the reference voltage and the dc bus voltage ensures the reliable coordinated operation. Real-time hardware-in-loop (HIL) tests considering three different scenarios are conducted to validate the effectiveness of the proposed method.