Abstract
This paper presents a novel solar-powered active Stirling converter with liquid power piston and solid controllable displacer. First, the working principle of the proposed converter is described. Then, finite time thermodynamic approach incorporating heat transfer equations are employed to determine gas temperatures in hot and cold spaces based on the assumption of imperfect regeneration. Accordingly, pressure variation of the gas due to reciprocating motion of the displacer piston is investigated using the obtained gas temperatures and Schmidt theory. Next, total work done by the converter and thermal efficiency are evaluated. Kinematic and dynamic equations governing the pump system are presented and the water flow characteristics in suction and discharge states are investigated. A simulation study is carried out through coupling and simultaneously solving the obtained equations. An optimization scheme is thus conducted to find an optimum frequency of the active converter so that a maximum power is generated. The influences of regenerator efficiency, dead volumes, and water head on the optimum operating frequency and the generated power are investigated. Finally, the proposed converter is constructed and primarily tested. The experimental outcomes clearly reveal the feasibility of pumping water at low temperature difference through the proposed active Stirling pump.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.