Abstract
A novel speed control method based on sliding mode control and disturbance observer is studied for permanent magnet synchronous motor drives. Different from the conventional speed and current cascade control structure in the field-oriented vector control, the new controller adopts the single-loop control structure, in which the speed and quadrate axes current controllers are combined together. First, a multiple-surface sliding mode controller is designed for the speed control system of permanent magnet synchronous motor. Although the sliding mode controller has the strong robustness for the matched disturbance in the system, it still cannot deal with mismatched disturbance effectively, such as external load disturbance and some parameter variations. Thus, the disturbance observer is introduced to estimate the disturbance in the motor, which is designed by combining the proposed sliding mode controller. Finally, the effectiveness is tested under various conditions by both simulation and experiment. The results show that the designed controller has the fast transient response and robustness under different operating conditions.
Highlights
Permanent magnet synchronous motor (PMSM) fed by pulse-width modulation (PWM) inverters is widely used in industrial fields, such as electric vehicle,[1] wind generator,[2] and robot.[3]
A single-loop control strategy based on Sliding mode control (SMC) and disturbance observer is designed instead of the traditional cascade control structure, and the PI control method is used in the d-axes current control
A novel sliding mode single-loop speed controller with disturbance observer is designed for PMSM drives instead of the traditional speed and current cascade control structure
Summary
Permanent magnet synchronous motor (PMSM) fed by pulse-width modulation (PWM) inverters is widely used in industrial fields, such as electric vehicle,[1] wind generator,[2] and robot.[3]. The contribution of the paper can be summarized as follows: (1) a novel sliding mode single-loop control method is proposed for PMSM control system instead of the traditional cascade control structure In this method, the speed and current controllers are designed together. A single-loop control strategy based on SMC and disturbance observer is designed instead of the traditional cascade control structure, and the PI control method is used in the d-axes current control
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.