Abstract

Single-phase adaptive reclosure (SPAR) schemes applied to transmission lines have been an effective method to improve the stability of power system. Attractive techniques have been proposed for SPAR schemes based on the tripped fault-phase voltage. But for transmission lines with shunt reactors, the voltage is so minor that the error of voltage transformer limits the applications of voltage-based SPAR schemes. To overcome this disadvantage, a new scheme using differential current between the calculated current based on transient fault model and the actual measured current from the fault phase of shunt reactor is proposed in this paper. The calculated current is obtained by using the transient fault model whether there is a transient or permanent fault. In the case of transient fault, the calculated current is close to the measured current due to the actual fault model being close to the calculated model. As for the permanent fault, the calculated current is quite different from the measured current. Therefore, the differential current of the fault phase can be employed to distinguish permanent fault from transient fault. At last, the Alternative Transients Program simulation results show that the developed algorithm can identify the permanent fault correctly and reliably, and is promised to be applied to SPAR for transmission lines with shunt reactors.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call