A novel semi-flexible coaxial nozzle based on fluid dynamics effects and its self-centering performance study

Abstract

Coaxial nozzles are widely used to produce fibers with core–shell structures. However, conventional coaxial nozzles cannot adjust the coaxiality of the inner and outer needles in real-time during the fiber production process, resulting in uneven fiber wall thickness and poor quality. Therefore, we proposed an innovative semi-flexible coaxial nozzle with a dynamic self-centering function. This new design addresses the challenge of ensuring the coaxiality of the inner and outer needles of the coaxial nozzle. First, based on the principles of fluid dynamics and fluid–structure interaction, a self-centering model for a coaxial nozzle is established. Second, the influence of external fluid velocity and inner needle elastic modulus on the centering time and coaxiality error is analyzed by finite element simulation. Finally, the self-centering performance of the coaxial nozzle is verified by observing the coaxial extrusion process online and measuring the wall thickness of the formed hollow fiber. The results showed that the coaxiality error increased with the increase of Young’s modulus E and decreased with the increase of flow velocity. The centering time required for the inner needle to achieve force balance decreases with the increase of Young's modulus (E\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$E$$\\end{document}) and fluid velocity (vf\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${v}_{f}$$\\end{document}). The nozzle exhibits significant self-centering performance, dynamically reducing the initial coaxiality error from 380 to 60 μm within 26 s. Additionally, it can mitigate the coaxiality error caused by manufacturing and assembly precision, effectively controlling them within 8 μm. Our research provides valuable references and solutions for addressing issues such as uneven fiber wall thickness caused by coaxiality errors.