A Novel Sediment Microbial Fuel Cell Based Sensor for On‐Line and in situ Monitoring Copper Shock in Water

Abstract

AbstractTo online and in situ monitor the heavy metal shock in water, a novel sediment microbial fuel cell based sensor was developed with anode being inserted into flooded soil and cathode submerged in overlaying water. Immediately after CuSO4 solutions were added into the overlaying water, the voltage signal generated by the sensor reached a peak and the increment from baseline voltage to peak voltage increased linearly with Cu2+ concentrations up to 160 mg L−1. After Cu2+ shock, charge transfer resistance (Rct) of anode and cathode was determined by using electrochemical impedance spectroscopy. Soil DNA and RNA was extracted and 16S rRNA and 16S rRNA gene of dominant exoelectrogenic bacteria (Geobacter and Clostridium) was quantified. Result showed that Cu2+ shock decreased cathodic charge transfer resistance (Rct) but did not affect anodic Rct. The addition of 320 mg L−1 Cu2+ significantly reduced abundance and activity of Geobacter and Clostridium in surface soil (0–3 cm in depth) but had no effect on exoelectrogenic bacteria in deeper soil. Moreover, baseline voltage was stable after Cu2+ shock. The result indicates that the sensor could online and in situ monitor Cu2+ shock which increased voltage signal by promoting cathodic reaction without dramatically inhibiting exoelectrogenic bacteria.