Abstract
This paper presents a novel Magentorheological (MR) brake with permanent magnets. The proposed MR brake can generate a braking torque at a critical rotation speed without an external power source, sensors, or controllers, making it simple and cost-effective device. The brake system consists of a rotary disk, permanent magnets, springs and MR fluid. Permanent magnets are attached to the rotary disk via springs, and they move outward through grooves with two different gap distances along the radial direction of the stator due to centrifugal force. Thus, the position of the magnets is dependent on the spin speed, and it can determine the magnetic fields applied to MR fluids. Proper design of the stator geometry gives the system unique torque characteristics. To show the performance of an MR brake system, the electromagnetic characteristics of the system are analyzed, and the torques generated by the brake are calculated using the result of the electromagnetic analysis. After the simulation study, a prototype brake system is constructed and its performance is experimentally evaluated. The results demonstrate the feasibility of the proposed MR brake as a speed regulator in rotating systems.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
