A Novel Range Matching Architecture for Packet Classification Without Rule Expansion

Abstract

The speed requirement for the routing table lookup and the packet classification is rapidly increasing due to the increase in the number of packets needed to be processed per second. The hardware-based packet classification relies on ternary content addressable memory (TCAM) to meet this speed requirement. However, TCAM consumes huge power and also supports only for longest prefix match and exact match, where the classification rule also has a range match (RM) field. Hence, it is mandatory to encode the RM into prefix match to accommodate the rule in TCAM. In the worst case, one rule is encoded into (2 W -2) 2 rules (where W is a number of bits to represent range). This work proposes a novel RM architecture, and a detailed analysis about the range field on the standard dataset and the real-life classifier rules are presented. In the literature, the existing RM architecture is used to avoid the range to prefix conversion, but due to the serial operation, it lacks in performance. For constant time lookup, TCAM is the best option, but it does not support RM. The proposed architecture takes one clock cycle for RM and does not require any encoding/ conversion. Hence, there will be a single entry for every rule. It is observed that just 4% of the two-dimensional range rules are present in this dataset, and it will increase the rule set size by 4 times in the best case and nearly 30 times in the worst case. The proposed RM circuit is operated in parallel with TCAM without compromising the speed, and this circuit saves huge power around 70% and area around 61%, where the range to prefix conversion/encoding is completely avoided. The proposed architecture is well suited for current IPv4- and IPv6-based networks, as well as in software-defined networks in the near future.