Abstract
This paper describes a novel design for millimeter and sub-millimeter wavelength varactor frequency triplers and quadruplers. The varactor diode is coupled to the pump source via waveguide and stripline impedance matching and filtering structures. Output power at the various harmonics of the pump frequency is fed to quasi-optical filtering and tuning elements. The low-loss quasi-optical structures enable near-optimum control of the impedances seen by the varactor diode at the idler and output frequencies, resulting in efficient high-order harmonic conversion. A minimum efficiency of 4 percent with 30-mW input power has been obtained for a tripler operating between 200 and 280 GHz, with a peak efficiency of 8 percent between 250 and 280 GHz. Another tripler, designed for the 260-350-GHz band, gave a minimum conversion efficiency of 3 percent with 30-mW input power, with a peak efficiency of 5 percent at 340 GHz.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
