Abstract
We report a novel pull-up type radio frequency (RF) microelectromechanical system (MEMS) switch with no elastic deformation of the cantilever involved in the actuation. At a voltage of 4.5V, reliable actuations are achieved such that the movable lower contact pad is pulled up by the electrostatic force to make contact with the upper pad. At a frequency of 50GHz, an insertion loss of 0.5dB, a return loss of 12.4dB, and an isolation of 55dB are obtained from the switch. The measured transient times for switch-on and switch-off are 120 and 130ns, respectively. Compared to the MEMS switches reported thus far, the pull-up type switch shows the best switching speed and isolation characteristic at 50GHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.