Abstract
A novel power/ground plane for eliminating the power noise in the high-speed digital circuits using an artificial substrate electromagnetic bandgap (AS-EBG) structure is proposed. The AS-EBG is designed by embedding the air rods and high dielectric constant (DK) rods between the coplanar EBG power/ground planes to enhance the stopband bandwidth. A 2-D transmission-line model of the AS-EBG power planes is also developed with experimental verification to explain the mode perturbation and predict the bandgap of the AS-EBG. It is found that over 60% enhancement of bandwidth (from 1.5 to 2.4 GHz) can be achieved for a 3 times 3 AS-EBG power plane compared to the coplanar-EBG power planes by proper design of the high DK rod with DK of 92. Based on SPICE-based modeling, the excellent power/signal integrity performance of the AS-EBG structure is also presented by the chip-package co-simulation in the time domain. It is found over 70% reduction of the simultaneously switching noise can be obtained with good signal eye-diagram improvement.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
