A novel miniaturized, multiband, AMC-integrated CPW-fed antenna operating at millimetric wave frequencies suitable for IoT applications

Abstract

PurposePlanar periodic metallic arrays behave as artificial magnetic conductor (AMC) surfaces when placed on a grounded dielectric substrate, and they introduce a zero-degree reflection phase shift to incident waves. The antenna designers have new challenges while designing the AMC structure. The steps followed in designing the structure are as follows: 1) Designing the antenna, aimed to operate at millimetric wave frequencies, (2) Designing the AMC at desired frequencies, (3) Integrating the antenna design and AMC to resonate at millimetric wave frequencies and (4) Validate the output parameters of the antenna to be suitable for Internet of Things (IoT) applications.Design/methodology/approachThe antenna is integrated with artificial material known as high impedance surface (HIS) for performance enhancement. A miniaturized, multiband, enhanced gain, AMC-integrated CPW-fed antenna is proposed and aimed to operate at millimetric wave frequencies, which is most suitable for IoT applications. The developed antenna operates at an extremely high range (30–300 GHz), i.e. from 40 to 60 GHz with the return loss values at lesser than −20 dB, and gain is greater than 10. The antenna is developed and simulated by using HFSS software.FindingsAn extensive research study has been carried out to develop a low profile, high gain and optimized antenna. The first two steps are separately designing the antenna and the AMC unit cell at the desired frequencies. The third step is finding the antenna or AMC radiating parts responsible for each resonant frequency by analysing the surface current distribution. CPW fed along with AMC integration has made the antenna feasible to achieve the extremely high frequency (EHF) range, i.e. 40–60 GHz, which is highly adoptable in IoT applications.Originality/valueThe result represented that the developed antenna is resonating at EHF rank with high gain and good imped matching when it is being compared with the previous models and has only CPW fed without having AMC structure integration. It is evident that the antenna which has only CPW fed has resonated at lower frequency than EHF range and justified output characteristics. But when it is embedded with the AMC structure, it resonates at the EHF range, which makes the antenna highly suitable for IoT applications, with more accuracy and high data rate possibility.