A novel method to enhance the accuracy of parameter identification in elasto-geometrical calibration for industrial robots

Abstract

Elasto-geometrical calibration is crucial for enhancing the absolute accuracy of robots in machining operations through the identification and compensation of parameter errors. However, the presence of inconsistent measurement units and improper selection of measuring poses can result in the ill-conditioned identification matrix (ICIM) issue, consequently impacting the accuracy of parameter identification. This paper introduces a novel method to tackle this challenge. Initially, an elasto-geometrical error model is developed based on the orientation-independent measurements (OIM), efficiently reducing the impact of mismatched positions and orientations on the ICIM problem. Subsequently, a PSO-SFFS algorithm is proposed to optimize the measurement configurations and minimize the influence of measurement noise. Furthermore, the incorporation of screw theory and the consideration of parallelogram mechanisms enhance the precision and comprehensiveness of the error model. Subsequent to the development of the error model, calibration comparison experiments are conducted on an industrial robot. Both simulation and experimental results validate the effectiveness of the proposed method in improving parameter identification accuracy.