Abstract
A layered perovskite PrBa(Fe0.8Sc0.2)2O5+δ (PBFSc) is applied as both cathode and anode in the symmetrical solid oxide fuel cells (SOFCs) field and its electrochemical properties are investigated. La0.9Sr0.1Ga0.8Mg0.2O3-δ (LSGM) supported symmetrical cell with PBFSc electrode exhibits polarization resistances of 0.05 Ω cm2 in air and 0.18 Ω cm2 in wet H2 at 800 °C. A maximum power density of 921 mW cm−2 is obtained using wet H2 as the fuel and ambient air as the oxidant at 850 °C. Moreover, the electrode demonstrates good redox stability in both oxidizing and reducing atmospheres. The layered perovskite PBFSc with favorable performance characteristics is shown to be an effective, redox-stable electrode candidate that can be used for both cathode and anode.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
