Abstract

SiC mosfet based converters are capable of high switching frequency operation. In this paper, the converter is operated with 50-kHz switching frequency for an active front-end rectifier application. Due to high switching frequency, the grid-side filter size is reduced, and the possibility of a high bandwidth current control loop is utilized in this paper. A current control loop with bandwidth of 5 kHz is designed using a proportional–integral controller in synchronously rotating dq -reference frame. In addition, the performance of the controller is tested under unbalanced input supply conditions. During this condition, new feed-forward signals, which are added to the controller output, are proposed. The gain of the feed-forward signal can be modified to achieve balanced sinusoidal grid currents, constant dc-link voltage, or a controlled negative-sequence input current, which are typical application-depending requirements. A closed-form formula to calculate the gain of the feed-forward signal to achieve the above-mentioned requirements is also proposed in this paper. To verify the proposed method, the simulation and experimental results are presented in this paper.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call