Abstract
We report on a novel HBT distributed amplifier design which achieves the highest gain-bandwidth product (GBP) per device f/sub T/ so far reported for HBT distributed amplifiers. This paper introduces a new design topology for HBT DA's which incorporates attenuation compensation on both the input and output transmission lines. A four-section HBT DA using this novel topology achieves a gain of 15 dB and a 3-dB bandwidth of >15 GHz. The resulting gain-bandwidth product is 84 GHz. When normalized to the device f/sub T/, this DA achieves the highest normalized gain-bandwidth-product figure of merit for HBT DA's, /spl ap/3.67, which is a 55% improvement over existing state-of-the-art performance. Attenuation compensation of the input transmission line is realized using HBT active impedance transformations. The resulting transistor configuration consists of a common-collector driving a common-emitter-cascode transistor pair. This configuration offers 15-20 dB more available gain for the device unit cell, and results in gain-bandwidth product improvements of 200% over a conventional common-emitter DA configuration. This paper discusses the design theory, techniques, and measurements of this newly developed HBT distributed amplifier topology.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
