A Novel Graphene Based Bi-Function Humidity Tolerant Binder for Lithium-Ion Battery.

Abstract

Binders play a critical role in rechargeable lithium-ion batteries (LIBs) by holding granular electrode materials, conductive carbons, and current collectors firmly together to form and maintain a continuous electron conduction phase with sufficient mechanical strength. In the commercial LIBs, the dominant binder is polyvinylidene fluoride for the cathode (LiCoO2 , LiFePO4 , LiNix Coty Mnz O2 , etc.) and carboxyl methylcellulose/styrene-butadiene rubber for the anode (graphite and Li4 Ti5 O12 ). However, these polymer binders have several drawbacks, particularly, a lack of electronic and lithium-ion conductivities. Here, a novel organic/inorganic hybrid conductive binder (LAP-rGO) for both the anode and cathode of LIBs is reported. The binder consists of 2D reduced graphene oxide sheets with anchored long alkane chains. Electrodes prepared using this binder exhibit sufficient high bond strength, fast electrolyte diffusion, high rate charge/discharge performance, and excellent cycling stability. Around 130 mAh g-1 capacity enhancement at 5C is demonstrated for LiFePO4 and Li4 Ti5 O12 electrodes owing to the combined improvement in electron and lithium ion transportation. LAP-rGO bond graphite anode shows specific capacity beyond its theoretical value. Electrode slurries prepared using this new binder have superior processing and coating properties that can be prepared under a high humidity and dried using less energy.