Abstract
A recently synthesized conducting polymer poly(TBT6–NH2); poly(6-(4,7-di(thiophen-2-yl)-2H-benzo[d][1,2,3]triazol-2-yl)hexan-1-amine) was utilized as a matrix for biomolecule immobilization. After successful electrochemical deposition the polymer poly(TBT6–NH2) on the graphite electrodes, immobilization of choline oxidase (ChO) was carried out. Due to the free amino functional groups of the polymeric structure, ChO molecules were successfully immobilized onto the polymer surface via covalent binding. For this, glutaraldehyde (GA) was used as crosslinker and bifunctional agent. Hence, a robust binding between the support and the protein molecules was achieved. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were used to monitor the surface morphologies of both the polymer and the bioactive layer and to confirm the binding of the protein. Amperometric measurements were recorded by monitoring oxygen consumption in the presence of choline as the substrate at −0.7 V. The optimized biosensor showed a very good linearity between 0.1 and 10 mM with a 7 s response time and a detection limit (LOD) of 16.8 μM to choline. Also, kinetic parameters, operational and storage stabilities were determined. Finally, designed system was applied for pesticide detection.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.