Abstract
The geological conditions of hot dry rock (HDR) reservoirs are complex. The geothermal mining of HDR faces major challenges in the drilling and construction of wells, fracturing to create storage, and flowing to extract heat. Vibration impacts help improve the rock-breaking efficiency, where the axial-torsional coupled vibration impact technology can increase the bit penetration depth and reduce the stick-slip effect. To study the feasibility and efficiency of the axial-torsional-coupled vibration impact-assisted Polycrystalline Diamond Compact (PDC) bit to break high-temperature and high-pressure rocks, a new experimental setup was designed. The system includes a drilling fluid circulation system, an axial-torsional coupled impact drilling system, a formation simulation system, and a data acquisition and control system. This setup can produce a rock-breaking torque of 2000 N·m, a drilling speed of 200rpm, a weight on bit of 100kN, an axial vibration frequency of 100Hz, and a torsional vibration frequency of 50Hz. It can simulate the formation pressure of 70 MPa and the rock temperature of 400 °C. A series of rock-breaking drilling experiments were successfully conducted using this setup. The results show that the axial-torsional coupled vibration-impact assisted PDC bit has a good performance in breaking high-temperature and hard rocks, which can accelerate the application of this new technology in deep formation drilling.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
