Abstract
A novel tapered plastic optic fiber (POF) biosensor is proposed and demonstrated for monitoring limonene in different concentrations. The mechanism of this device is based on an increase in the light transmission of a sensor submerged in a higher-concentration limonene solution, which also reflects an increase in the refractive index of the sensor. The tapered POF was fabricated using the chemical etching method to accomplish different waist diameters of 0.6 mm, 0.55 mm, and 0.5 mm, with a fiber length of 10 cm and a 2 cm sensing region. An Arduino integrated development environment (IDE) program was used to drive the voltage values from the photodetectors to obtain the measurements. As the limonene concentration solution varied from 20% to 100%, the output voltage of the sensor increased linearly, showing a sensitivity of 0.295 V/%, 0.33 V/%, and 0.46 V/% for tapered waist diameters of 0.6 mm, 0.55 mm, and 0.5 mm, respectively. The proposed sensor is a low-cost solution measurement option with high sensitivity, while it also involves a simple and easy fabrication technique.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Bulletin of Electrical Engineering and Informatics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
