Abstract

This article proposes a new dual-band tunable bandstop filter. This tunable filter is composed of two separate parts, the transmission line, and coupled stubs that each connect to three varactors. The center frequency and bandwidth in each band can be controlled individually. Moreover, the LC equivalent circuit of the proposed filter is calculated, and the results are simulated. In the proposed filter, the simulations show that the first stopband can be tuned in a frequency range from 1.2 to 1.9 GHz with 10-dB absolute bandwidth 310 ± 30 MHz, whereas the second stopband varies from 2.5 to 3.3 GHz with the 10-dB absolute bandwidth 720 ± 20 MHz. These two stopbands can also be tuned independently. Furthermore, the bandwidth of each fixed center frequency can be changed easily. The fabricated proposed filter validates the simulation results. The compact filter has an effective size of 9 × 27.5 mm2.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.