Abstract

Among the patterning technologies for organic thin-film transistors (OTFTs), the fabrication of OTFT electrodes using polymer templates has attracted much attention. However, deviations in the electrode alignment occur because the coefficient of thermal expansion (CTE) of the polymer template is much higher than the CTE of the dielectric layer. Here, a novel dry-blending method is described in which SiO2 nanoparticles are filled into a grooved silicon template, followed by permeation of polydimethylsiloxane (PDMS) into the SiO2 nanoparticle gaps. The SiO2 nanoparticles in the groove are extracted by curing and peeling off PDMS to prepare a PDMS/SiO2 composite template with a nanoparticle content of 83.8 wt %. The composite template has a CTE of 96 ppm/°C, which is a reduction by 69.23% compared with the original PDMS template. Finally, we achieved the alignment of OTFT electrodes using the composite template.

Highlights

  • Organic thin-film transistors (OTFTs) provide a platform to construct next-generation large-area, light-weight, flexible, and stretchable optoelectronic applications [1,2], including flexible displays [3], electronic papers [4], sensors [5], and medical applications [6]

  • 108.3 ppm/°C, which is close to the coefficient of thermal expansion (CTE) of the PDMS/SiO2 composite template prepared via dry blending

  • We sputtered an approximately 400 nm thick layer of metallic silver as OTFT electrodes on the surface of the PDMS/SiO2 composite template prepared via dry blending

Read more

Summary

Introduction

Organic thin-film transistors (OTFTs) provide a platform to construct next-generation large-area, light-weight, flexible, and stretchable optoelectronic applications [1,2], including flexible displays [3], electronic papers [4], sensors [5], and medical applications [6]. A PDMS/SiO2 composite template with a SiO2 nanoparticle content of 83.8 wt % is prepared via dry blending.

Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call