Abstract
Cross-layer design is a promising direction and challenging issue for quality delivery of multimedia over wireless networks. This article proposes a cross-layer design which can substantially enhance the transmission quality of video streaming over 802.11e ad hoc networks. The proposed design consists of two parts: a dispersive video frame importance (DVFI) scheme in the application layer that can correctly label the priorities of video packets, and a comb-shaped quadratic mapping (CQM) algorithm in the medium access control (MAC) layer that can provide a better congestion control mechanism among the multiple access category (AC) queues than 802.11e Enhanced Distributed Channel Access (EDCA) for wireless video delivery. The DVFI value of a video frame is measured from its own transmission loss and the accompanied impact to other coding-dependent video frames, and is accordingly adopted to prioritize the video frame associated packets. When these prioritized video packets arrive at the reserved AC queue in the MAC layer, the CQM algorithm can accordingly provide multi-branched service differentiation among them by dynamically downward mapping less significant video packets to lower-priority ACs based on the instant congestion level of the reserved AC queue, which can thus offer a better channel access resource to those video packets of higher priorities. In addition, the minimum-delay-time rule embedded in the CQM will select a better destiny for those downward mapped video packets among the lower-priority AC queues. Under various video-input-rate and cross-traffic tests, the simulation results show that this study outperforms the existing works, including EDCA, Adaptive Mapping, and Enhanced Adaptive Mapping.
Highlights
Over the past decade, IEEE 802.11 has become the dominant technology for wireless local area network (WLAN) because of low cost and easy deployment, and the promise of high-quality multimedia service is beyond doubt one of the major driving forces of the generation WLAN
dispersive video frame importance (DVFI) is proposed for a precise indexing of the video frame importance from the application layer, while the proposed comb-shaped quadratic mapping (CQM) is a corresponding video packet mapping algorithm among the access category (AC) in the medium access control (MAC) layer, which has multi-branched downward mapping probability functions according to the equal population grouping of DVFI
To support the superiority of this cross-layer framework, extensive tests have been conducted over various input rates of video source in AC[2] and congestion cases of cross traffic in the other ACs
Summary
IEEE 802.11 has become the dominant technology for wireless local area network (WLAN) because of low cost and easy deployment, and the promise of high-quality multimedia service is beyond doubt one of the major driving forces of the generation WLAN. Since multimedia over WLAN is bandwidth-restricted and delay-sensitive, and the conventional 802.11 medium access control (MAC) mechanism [1,2] is not equipped with quality of service (QoS), quality delivery of multimedia over the conventional 802.11 WLAN is very challenging. To address this issue, the IEEE 802.11e standard [3] was proposed in late 2005 to offer multimedia service differentiation. In order to shorten or stop the error propagation, a periodic Group of Pictures (GOP) structure should be adopted
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: EURASIP Journal on Wireless Communications and Networking
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.