A novel cobalt-iron bimetallic hydrochar for the degradation of triclosan in the aqueous solution: performance, reusability, and synergistic degradation mechanism

Abstract

Low activation performance is a critical issue limiting the practical application of low-cost biochar in the advanced oxidation. Given the high potential of transition metals in the persulfate activation process and abundant oxygen-containing groups of hydrochar, hydrochar derived from cobalt (Co)-modified iron (Fe)-enriched sludge was synthesized and its performance and activation mechanism for the degradation of triclosan were investigated. Co modification significantly altered the morphology of hydrochar, and the increased Co–Fe mass ratios transformed hydrochar from granular to rose-shaped lamellar and then to helical sheet structures. Specific surface area, defect degree, and oxygen-containing groups of hydrochar increased with increasing cobalt-iron mass ratios. The highest removal of triclosan was up to 98% in the hydrochar/peroxymonosulfate (PMS) system under a wide range of pHs (3–10) and still remained higher than 90% after four cycles. Both Radical (mainly hydroxyl radical) and nonradical pathways (singlet oxygen and electron transfer) were evidenced to play roles in the triclosan removal. Fe3+ promoted the regeneration of Co2+ and realized the efficient circulation of Co3+/Co2+. A ternary system consisting of electron donor (triclosan)-electron mediator (hydrochar)-electron acceptor (PMS) provided channels for electron transfer. No measurable Co and Fe were released during the reaction, and the toxicity of degradation intermediates was lower than that of triclosan. Beside triclosan, rhodamine B, bisphenol A, sulfamethoxazole, and phenol were also almost degraded completely in this oxidation system. This study provides a promising way for the enhancement of catalytic activity of carbonaceous material.