Abstract

A novel non-enzymatic photoelectrochemical (PEC) glucose sensor was first constructed based on the unique two-dimensional (2D) bismuth oxychloride-graphene nanohybrid sheets (BiOCl-G NHS). We have utilized a facile hydrothermal approach for the preparation of BiOCl-G NHS. Results from cyclic voltammetric and differential pulse voltammetric measurements revealed that the BiOCl-G NHS electrode is capable of generating photocurrent for glucose when its surface is irradiated with a light source (wavelength=365nm). The photocurrents produced for the presence of glucose at the bias potential of +0.50V showed a linear dependence on glucose concentration in the range between 0.5 and 10mM and had a detection limit of 0.22mM. The PEC detection of glucose at BiOCl-G NHS was not influenced by the presence of other common interfering species. The glucose levels, as determined by the BiOCl-G NHS sensor, agreed well with those obtained by the commercial glucometers. This novel non-enzymatic PEC glucose sensor exhibited good performances, such as a wider concentration range (500µM-10mM), high sensitivity (1.878µMmM−1cm−2 (500µM–2mM) and 127.2µMmM−1cm−2 (2mM–10mM)), good selectivity, reproducibility (RSD=2.4%) and applicability to real sample (human serum).

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.