A novel approach to validation of a positive-sequence modeling of a converter-interfaced generation with hydrogen energy storage in practical power systems

Abstract

The most important hydrogen energy storage technologies, developed between 1974 and 2022, now enable the quality operation of global power grids that integrate alternative energy facilities (wind power, solar power, geothermal power, etc.). With the continuous large-scale penetration of converter-interfaced generation (CIG), based on the combined use of renewable energy sources (RES) and hydrogen energy storage systems (ESS), into practical power systems, the dynamic characteristics of the latter change significantly. New challenges with the power system control and stability arise due to the specific CIG properties. A positive-sequence time-domain simulation is frequently used to solve them. However, the known simplifications and limitations are inevitably applied in case of such simulation. These become critical for the CIG with RES and hydrogen ESS models due to their fast dynamics. Therefore, the validation of such simulation results becomes relevant. This paper proposes a novel validation approach based on the use of a benchmark tool Hybrid Real-Time Power System Simulator (HRTSim) instead of field measurements. A major feature of the proposed approach is the possibility of a guaranteed validation of the benchmark tool using any state of the modeled power system. A hybrid implementation of a detailed three-phase model of CIG is also developed for the HRTSim, which provides an adequate simulation of the full range of dynamic processes. The results of validation of a positive-sequence simulation of a practical power system with CIG, which includes both RES and hydrogen ESS, using the developed approach presented in this paper have allowed to identify the causes of calculation errors, as well as factors affecting them.