A Novel Approach for Cable Tension Monitoring Based on Mode Shape Identification

Abstract

Estimation and monitoring of cable tension is of great significance in the structural assessment of cable-supported bridges. For short cables, the traditional cable tension identification method via frequency measurement has large errors due to the influence of complex boundaries, which affect the accuracy of estimation. A new cable tension estimation method based on mode shape identification with a multiple sensor arrangement on the cable can take the influence of boundary conditions into account and its accuracy has been verified. However, it requires more sensors compared to the traditional frequency-based method, which will significantly increase the cost of long-term monitoring in practice. Therefore, a novel approach for cable tension monitoring considering both cost and accuracy is further proposed in this study. The approach adopts multiple sensors to measure the influence of boundary conditions. Then, only a single sensor is required for long-term monitoring of the cable. In this paper, an analytical model of the cable is firstly established. The influence of boundary conditions is calculated, which ensures the accuracy of mode shape identification. Furthermore, a field experiment is carried out to verify the effectiveness of the new approach. The results have demonstrated the effectiveness and accurateness of the proposed method in long-term short cable tension monitoring.