Abstract
In this paper, a stand-alone photovoltaic (SAPV) power supply system for Microner sprayer is identified and proposed. The designed system was composed of three main parts: sprayer, solar power supply and control system. Initially, the control board and data acquisition system were designed and simulated by the Proteus software and then implemented using an AVR microcontroller and tested via LabVIEW in the laboratory. Next, a prototype system was fabricated for evaluation purposes. A PV panel size of 88.5 cm2, positioned horizontally above operator's head that generates 26.4 Wh/day was used as a solar energy source. A small 2 Ah (12 V) battery is installed in the system as a stabiliser. This sprayer can work seven to nine hours daily. It is calculated that the average loss of collected energy due to non-application of maximum power point tracker was approximately 25%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.