Abstract
Abstract This paper presents a novel design and the prototyped solar cooking stove which uses a large Fresnel lens for the concentration of sunlight. The technology demonstrates high safety and efficiency of solar cooking and heating using Fresnel lenses which are low cost and available from off-the-shelf. The stove has a fixed heat-receiving area located at the focal point of the lens. The sunlight tracking system rotates the Fresnel lens about its focal point in both zenith and azimuth angles. The tracking is accomplished through a revolving motion of two rotation arms that hold the lens and a horizontal rotation of a platform that the lens system stands on. The rotation of the arms tracks the sunlight in zenith plane, while the rotation of the platform tracks in the azimuth plane. Since the solar tracking allows the Fresnel lens to concentrate sunlight to a fixed small heat-receiving area, relatively low heat loss and high energy efficiency is made possible. The heat is used to maintain a stovetop surface at temperatures around as high as 300 °C, which is practical for cooking applications in a very safe, user-friendly, and convenient manner. The system also demonstrates the possibility of transferring heat using a working fluid for indoor heating and cooking. Wider applications using the system for solar thermal collection and utilization are also undergoing development.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.