A novel annular slit-type emitter developed for multi-jet electrospray propulsion

Abstract

Electrospray thrusters employ ionization in the liquid phase to produce and propel streams of molecular ions or highly charged droplets at significant velocities. In this study, we developed a novel annular slit-type emitter for electrospray and investigated its operational modes under varying applied potentials in both open atmosphere and vacuum conditions. To assess the performance of the annular slit-type emitter in comparison to the conventional capillary-type emitter, benchtop electrospray experiments were conducted using water and glycerin as working fluids for both emitter types. The study examined the formation of the Taylor cone, cone-to-jet transition, stable jet, whipping jet, and multi-jet, along with their dependence on fluid viscosity and electric potential for both emitter designs. Clear distinctions in hydrodynamic mode, drop-to-cone mode, and cone-to-jet transition mode were observed between the two emitters. As the electric potential increased, the capillary-type emitter exhibited a whipping and pulsating water jet, while glycerin displayed a steady tilted jet. In contrast, the annular slit-type emitter demonstrated a pulsating water jet followed by a distinctive dripping mode at higher electric potentials, while glycerin formed multiple steady jets around the annular slit. Notably, the annular slit-type emitter, when subjected to an 18.5 kV potential, produced seven electrospray jets for glycerin, a phenomenon attributed to the novel design of the emitter and the viscosity of glycerin enabling the generation of multiple cone-jets at a specific electrostatic potential around the slit peripheral meniscus. Vacuum chamber tests of the annular-type emitter using liquid indium as an ion source at 1 × 10−5 Torr revealed an ion-current density of 0.3 mA/mm, resulting in a thrust of 290 μN.