Abstract
Ceramic membranes have been widely explored as competent alternatives to traditional polymeric membranes for treating oily wastewater. Despite the exceptionally high rejection rate (>90 %) of oil–water (O/W) emulsions, membrane fouling is an inevitable phenomenon that limits the separation efficiency of ceramic membranes. Biomimetic technology, known as the lotus effect, has attracted attention as a groundbreaking method for reducing membrane fouling. However, it is difficult to control the nanostructured surfaces of ceramics, while polymer fabrication is facile. In this study, we developed a novel and simple method to fabricate an α-alumina (Al2O3) microfiltration (MF) membrane with a Nepenthes pitcher plant-like microstructure. The surface roughness of the biomimetic membrane was 286 nm, which was approximately twice that of a normal ceramic membrane. Accordingly, the oil contact angle increased from 88.84 to 128.51°. The novel biomimetic membrane showed high efficiency with an emulsion permeability of 44.1 LMH/bar, a flux recovery of 90.91 %, and an oil rejection rate of 99 %.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
