Abstract
For the first time, an improved charge pumping (CP) method has been implemented for direct determination of the interface traps in ultra-short gate length CMOS devices with ultra-thin gate oxide in the direct tunneling regime. The leakage current in a 12-16 A gate oxide can be removed from the measured CP current, which enables accurate determination of the interface traps. This method has been demonstrated successfully for various rapid thermal nitric oxide (RTNO) grown and remote plasma nitridation (RPN) treated oxide CMOS devices with very thin gate oxide. Moreover, it can be used as a good monitor of ultra-thin gate oxide process and the evaluations of device reliabilities in relating to the interface trap generation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.