A novel analytical approach for predicting the noncylindrical pile penetration‐induced soil displacement in undrained soil by combining use of cavity expansion and strain path methods

Abstract

SummarySince development of cavity expansion theory and strain path method, almost all the conventional analyses of pile penetration problem have been based on circular cross section penetrometer. However, noncylindrical pile (with noncircular cross section) is also required in geotechnical engineering such as rectangular cross‐sectional pile, X‐sectional cast‐in‐place concrete pile, H‐shaped steel pile, prefabricated vertical drains, and flat dilatometer. This paper presents a novel and general analytical approach for capturing the soil deformation mechanism around the pile with arbitrary cross section. The penetration problem is simulated by a new 2‐dimensional (radial and circumferential) cavity expansion model. Based on the theoretical framework of strain path method, the kinematics (velocity field) of the noncylindrical cavity expansion is reduced to solve the Laplace equation with arbitrary velocity boundary conditions by using the conformal mapping technique. Then, solutions for the strain and displacement, which could consider the large deformation effect, are obtained by the integration of the strain rate and velocity along the streamline. The analytical solution is validated by comparing the degenerate solution of this study with conventional circular (cylindrical) cavity expansion theory. Subsequently, typical numerical examples for the deformation mechanism of elliptical and rectangular cavity expansion are presented to prove the advantage of the proposed new solution particularly in capturing the noncylindrical symmetric displacement field. A brief application of the proposed new analytical solution to the interpretation of the smear effect of prefabricated vertical drain installation confirms its useful in geotechnical engineering.