Abstract
In this work, a new AlGaN/GaN vertical high electron mobility transistor (HEMT) with silicon oxide (SiO2) current blocking layer (CBL) is designed and studied numerically for high-power devices. To overcome the excessive vertical leakage through CBL layer in conventional p-GaN CBL vertical HEMT, large band-gap material, SiO2 is, for the first time, introduced as a CBL material. The band-gap of SiO2 leads to a large barrier which can effectively suppress the vertical leakage even at high drain bias and enhance the breakdown voltage to 1270 V (154% enhancement compared with the conventional p-GaN CBL vertical HEMT). In addition, a device with four parallel apertures is proposed to reduce the aperture resistance, where the total aperture thickness is equal to the aperture thickness of the conventional one. Therefore, the drain current is increased. We not only focus on the vertical leakage control, but also, on the drain current boost (7% improvement).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.