Abstract
This paper proposes to improve hydrogen production performance of ordered-porous stainless steel by increasing its forming structure parameters. Firstly, selective laser melting additive manufacturing of ordered-porous stainless steel is carried out through designed orthogonal experiment table, to obtain its forming structure parameters under different manufacturing process parameters. Then, different forming structure parameters of ordered-porous stainless steel are converted into a comprehensive index by grey relation theory, which is grey relational degree (GRD). When powder thickness, scanning speed, scanning space and laser power are 30 μm, 800 mm/s, 90 μm and 60 W, respectively, the highest GRD of 0.930 is obtained, when those are 40 μm, 1200 mm/s, 70 μm and 60 W, respectively, the lowest GRD of 0.410 is gained. Finally, catalyst bonding strength and hydrogen production performance of the ordered-porous stainless steels with the above GRDs are verified. It is found that the ordered-porous stainless steel with the highest GRD has higher catalyst bonding strength and higher hydrogen production performance. When 12 mL/h injection rate of methanol–water solution and 250 ℃ reaction temperature are used, CH3OH conversion, H2 flowing rate and CO selectivity of the above ordered-porous stainless steel are 64.3%, 0.396 mol/h and 6.75%, respectively.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
