Abstract
AbstractIn this paper, a 1×4 active phased‐array antenna is designed using a voltage‐controlled oscillator (VCO) with a varactor diode and a transmission‐line network. The varactor diode was connected in parallel to the FET for the wide tuning range of the VCO, and the transmission‐line network was composed of the transmission line,the open stub, and the chip resistor. The scan range, −20 to 22° at 2.44 GHz, was controlled by the applied varactor diode voltage and the transmission‐line coupling network. © 2001 John Wiley & Sons, Inc. Microwave Opt Technol Lett 29: 148–150, 2001.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.