Abstract
This paper proposes a non-isolated soft-switching bidirectional dc/dc converter for interfacing energy storage in DC microgrid. The proposed converter employs a half-bridge boost converter at input port followed by a LCL resonant circuit to assist in soft-switching of switches and diodes, and finally a voltage doubler circuit at output port to enhance the voltage gain by 2x. The LCL resonant circuit may also add a suitable voltage gain to the converter. Therefore, overall high voltage gain of the converter is obtained without transformer or large number of multiplier circuit. For buck operation, the high side voltage is first divided by half with capacitive divider to gain higher step down ratio. Converter is operated at high frequency to obtain low output voltage ripple and reduced magnetics and filters. Zero voltage turn-on is achieved for all switches and zero current turnon and turn-off is achieved for all diodes for both buck/boost operation. Voltage stress across switches and diode is clamped naturally without external snubber circuit. An experimental prototype rated at 350 W has been designed, built and tested in the laboratory to verify the analysis, design and demonstrate the performance of proposed converter.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
