A non‐isolated single‐switch ultra‐high step‐up DC–DC converter with coupled inductor and low‐voltage stress on switch

Abstract

AbstractThis paper presents a non‐isolated single‐switch ultra‐high step‐up (UHSU) DC–DC converter with a three‐winding coupled inductor (CI) which is utilized to achieve ultra‐high voltage gain with a small amount of duty cycle leading to low conduction losses of the power switch and higher efficiency. The voltage gain of the suggested UHSU converter is adjusted by two methods: the duty cycle of the power switch and the three‐winding CI turn ratio, therefore enhancing the design flexibility of the suggested converter. Due to the utilization of the passive clamp circuit in the structure of the proposed converter, it is possible to select a power switch with low voltage rated and small ON‐state resistance, further enhancing the converter efficiency. The operation modes are discussed in detail and to clarify the salient features of the proposed converter, a comparison with other configurations is provided. Finally, to accredit the performance of the proposed converter, a 150‐W laboratory archetype with an input and output voltage of 20 and 300 V, respectively, at 50 kHz switching frequency is fabricated.