Abstract

The interconnection of new generating and storing devices to the power grid imposes the necessity of synchronizing, so the power flow can be manipulated and distributed. In the presence of an increasingly perturbed electric grid, many proposals of novel and modified synchronization techniques attained enough robustness to deal with known perturbations. However, such proposals exhibit drawbacks on their own, leaving open enhancement opportunities, mostly over their discrete implementation—e.g., sampling issues and not-considered inter/harmonics—and their inherent complexity—e.g., the need for frequency adaptability. In this work, three traditional synchronous reference frame (SRF) phase-locked loops (PLL) are modified to implement discrete filtering, such as the well-known proposals based on moving average filters (MAFs), to avoid the problems mentioned above, known for affecting the MAF’s performance. This proposal makes use of discrete, efficient units modularly assembled to yield a signal’s average, based on elliptic half-band filters. The proposed PLLs were tested and exhibited clear advantages—robustness against frequency disturbances—over MAF-based equivalents at standardized tests over a typical simulation environment, setting through this work an initial milestone for its verification and further incorporation in more complex synchronization topologies.

Highlights

  • The power grid of the future, as a concept, is taking a significant role in the planning and modification of public infrastructure

  • We propose a sharp transition-band low-pass filters (LPF), attained by sequential half-band (HB)

  • moving average filters (MAFs)-phase-locked loop (PLL) were compared against their non-filtered versions—the MAF was bypassed—and

Read more

Summary

Introduction

The power grid of the future, as a concept, is taking a significant role in the planning and modification of public infrastructure. Many of the objectives that have been stated as part of the smart-grid approach or the micro-grid viewpoint are challenging conceptually and technically some old assumptions regarding power systems [1]. The modifications at the distribution level—implying the incorporation of distributed generators, new loads, and storage systems—bring new difficulties, as the massive penetration of power electronics reduces its reliability [2]. Researchers face the need for more robust synchronization systems to cope with domestic renewables and storage, electric vehicles, nonlinear loads, and inverters inside heavy appliances, to name a few. Even the measuring devices would necessarily face modifications, due to disturbances. Its original conceptualization has been subjected to many modifications aiming mainly at increased robustness [3].

Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call